AeroPACK attaches to the lift gate of any vehicle:
Crossovers, Hatchbacks, Minivans, Sedans and SUVs

Vehicle Fit Guide                
FIT GUIDE & INSTRUCTIONS
  • Aero PACK straps directly to any lift gate, hatch back or trunk: Including Crossovers, Hybrids, Hatchbacks, Minivans, SUVs, large vans and sedans.
  • Top lift gate channel to be 5/16 inch wide (#2 pencil diameter).
  • We make it easy -- There are no look up tables, no expensive racks, rails or lift kit hardware.
  • Aero PACK - does not fit Volvos with a 1/8 inch wide channel.

    MEASURE THE LIFT GATE WIDTH

    1.   Measure the lift gate width. AeroPACK should be attached so rear turn signals / brake lights are visible.  Mount AeroPACK 6-8 inches below the top of the rear window for visibility.  D.O.T. law requires 2 functioning side mirrors, if the rear window is obscured.  Be a safe and responsible driver, comply with all local laws.

    AeroSACK   -  44 In W x 24 In T footprint ( 4 sleeping bags + 1 duffel)
    AeroPACK 10  -  46 In W x 24 In T footprint ( 5 sleeping bags + 1-2 duffels)
    AeroPACK 14  -   48 In W x 26 In T  footprint (6 sleeping bags + 2-3 duffels)
    AeroPack Connector     AeroPACK Fit Guide
    CHECK CHANNEL WIDTH

    2.    The lift gate channel should be 5/16 IN (#2 pencil diameter). If fit is tight, open the trunk or lift gate, inset the clips or move the rubber gasket aside and insert the J-hook.
    MOUNTING

    3.    Mount J-hooks to a hard point, not glass or plastic.
    4.    Lift Gate: Strap 3 hooks on top and 2 bottom hooks to side of lift gate, tighten straps securely.
    5.    Trunk: Place pack on trunk, overlap 3 straps over bag and hook to base of trunk lid and overlap 2 straps over bag, to top of trunk edge.

    Lift Gate Mounting             Trunk Mounting
    Lift Gate MountingTrunk Mounting